This should only be used if all of the following conditions are true:
a) Your node is private and not shared with others
b) Port 12391 (API port) isn't forwarded
c) You have granted access to specific IP addresses using the "apiWhitelist" setting
The node will warn on startup if this setting is used without a sensible access control whitelist.
Until now, a high weight invalid block can cause other valid, lower weight alternatives to be discarded. The solution to this problem is to track invalid blocks and quickly avoid them once discovered. This gives other valid alternative blocks the opportunity to become part of a valid chain, where they would otherwise have been discarded.
As with the block minter update, this will cause a fork when the highest weight block candidate is invalid. But it is likely that the fork would be short lived, assuming that the majority of nodes pick the valid chain.
If it has been more than 10 minutes since receiving the last valid block, but we have had at least one invalid block since then, this is indicative of a stuck chain due to no valid block candidates. In this case, we want to allow the block minter to mint an alternative candidate so that the chain can continue.
This would create a fork at the point of the invalid block, in which two chains (valid an invalid) would diverge. The valid chain could never rejoin the invalid one, however it's likely that the invalid chain would be discarded in favour of the valid one shortly after, on the assumption that the majority of nodes would have picked the valid one.
- Use the "{\"age\":30}" data to make the tests more similar to some real world data.
- Added tests to ensure that registering and orphaning works as expected.
Whilst not ideal, this is necessary to prevent the chain from getting stuck on future blocks due to duplicate name registrations. See Block535658.java for full details on this problem - this is simply a "catch-all" implementation of that class in order to futureproof this fix.
There is still a database inconsistency to be solved, as some nodes are failing to add a registered name to their Names table the first time around, but this will take some time. Once fixed, this commit could potentially be reverted.
Also added unit tests for both scenarios (same and different creator).
TLDR: this allows all past and future invalid blocks caused by NAME_ALREADY_REGISTERED (by the same creator) to now be valid.
This was accidentally missed out of the original code. Some pre-updated nodes on the network will be missing this index, but we can use the upcoming "auto-bootstrap" feature to get those back.
Now only skipping the HTLC redemption if the AT is finished and the balance has been redeemed by the buyer. This allows HTLCs to be refunded for ATs that have been refunded or cancelled.
Previously, if an error was returned from an Electrum server (such as "server busy") it would throw a NetworkException that would be caught outside of the server loop and cause the entire request to fail.
Instead of throwing an exception, I am now logging the error and returning null, in the same way we do for IOException and NoSuchElementException further up in the same method.
This allows the caller - most likely connectedRpc() - to move on to the next server in the list and try again.
This should fix an issue seen where a "server busy" response from a single server was essentially breaking our implementation, as we would give up altogether instead of trying another server.
This is a workaround for an UnsupportedOperationException thrown when using X2Go, due to PERPIXEL_TRANSLUCENT translucency being unsupported in splashDialog.setBackground(). We could choose to use a different version of the splash screen with an opaque background in these cases, but it is low priority.
Updated the "localeLang" files with new keys and removed old unused keys for English, German, Dutch, Italian, Finnish, Hungarian, Russian and Chinese translations
These are the same as the /lists/blacklist/address/{address} endpoints but allow a JSON array of addresses to be specified in the request body. They currently return true if
The ResourceList class creates or updates a list for the purpose of tracking resources on the Qortal network. This can be used for local blocking, or even for curating and sharing content lists. Lists are backed off to JSON files (in the lists folder) to ease sharing between nodes and users.
This first implementation allows access to an address blacklist only, but has been written in such a way that other lists can be easily added. This might be needed in the future, e.g. to blacklist a group, a poll, or some hosted data. It could also be used by community members to curate lists of favourite or problematic content, which could then be shared or even subscribed to on the chain by other users.
The inputs and outputs contain a simpler version than the ones in the raw transaction, consisting of `address`, `amount`, and `addressInWallet`. The latter of the three is to know whether the address is one that is derived from the supplied xpub master public key.
The previous criteria was to stop searching for more leaf keys as soon as we found a batch of keys with no transactions, but it seems that there are occasions when subsequent batches do actually contain transactions. The solution/workaround is to require 5 consecutive empty batches before giving up. There may be ways to improve this further by copying approaches from other BIP32 implementations, but this is a quick fix that should solve the problem for now.
This involved a small refactor of the ACCT code to expose findSecretA() in a more generic way. Bitcoin is disabled for refunding and redeeming as it uses a legacy approach that we no longer support. The {blockchain} URL parameter has also been removed from the redeem and refund APIs, because it can be obtained from the ACCT via the code hash in the AT.
The "dust" threshold is around 1 DOGE - meaning orders below this size cannot be refunded or redeemed. The simplest solution is to prevent orders of this size being placed to begin with.
This is probably our number one reliability issue at the moment, and has been a problem for a very long time.
The existing CHECKPOINT_LOCK would prevent new connections being created when we are checkpointing or about to checkpoint. However, in many cases we obtain the db connection early on and then don't perform any queries until later. An example would be in synchronization, where the connection is obtained at the start of the process and then retained throughout the sync round. My suspicion is that we were encountering this series of events:
1. Open connection to database
2. Call maybeCheckpoint() and confirm there are no active transactions
3. An existing connection starts a new transaction
4. Checkpointing is performed, but deadlocks due to the in-progress transaction
This potential fix includes preparedStatement.execute() in the CHECKPOINT_LOCK, to block any new transactions being started when we are locked for checkpointing. It is fairly high risk so we need to build some confidence in this before releasing it.
Rename to zh_SC for better distinguish between zh_SC (Simple Chinese)and zh_TC(Traditional Chinese)
Rephrase some of the words for better understanding.
Now that we aren't disconnecting mid sync, we can get away with more frequent disconnections. This brings the average connection length to around 9 mins.
Connection limits are defined in settings (denominated in seconds):
"minPeerConnectionTime": 120,
"maxPeerConnectionTime": 3600
Peers will disconnect after a randomly chosen amount of time between the min and the max. The default range is 2 minutes to 1 hour, as above.
This encourages nodes to connect to a wider range of peers across the course of each day, rather than staying connected to an "island" of peers for an extended period of time. Hopefully this will reduce the amount of parallel chains that can form due to permanently connected clusters of peers.
We may find that we need to reduce the defaults to get optimal results, however it is best to do this incrementally, with the option for reducing further via each node's settings. Being too aggressive here could cause some of the earlier problems (e.g. 20% missing blocks minted) to reappear. We can re-evaluate this in the next version. Note that if defaults are reduced significantly, we may need to add code to prevent this from happening mid-sync. With higher defaults, this is less of an issue.
Thanks to @szisti for supplying some base code for this commit, and also to @CWDSYSTEMS for diagnosing the original problem.
This indicates the size of the re-org/rollback that was required in order to perform this sync operation. It is only included if it's greater than 0 blocks.
When sending or requesting more than 1000 online accounts, peers would be disconnected with an EOF or connection reset error due to an intentional null response. This response has been removed and it will instead now only send the first 1000 accounts, which prevents the disconnections from occurring.
In theory, these accounts should be in a different order on each node, so the 1000 limit should still result in a fairly even propagation of accounts. However, we may want to consider increasing this limit, to maximise the propagation speed.
Thanks to szisti for tracking this one down.
This loops through all sell orders and attempts to redeem the LTC from each one. It will return true if at least one was redeemed, or false if none are available to be redeemed. Details are logged to the log.txt file rather than returned in the API response.
The previous query was taking almost half a second to run each time, whereas the new version runs 10-100x faster. This was the main bottleneck with block serialization and should therefore allow for much faster syncing once rolled out to the network. Tested several thousand blocks to ensure that the results returned by the new query match those returned by the old one.
A couple of classes were using the bitcoinj alternative, which is twice as slow. This mostly affected the API on port 12392, as byte arrays were automatically encoded as base58 strings via the Base58TypeAdapter / JAXB package-info.
This is probably more validation than is actually needed, but given that we use the same field for LTC and QORT receiving addresses in the database, it is best to be extra careful.
This returns serialized, base58 encoded data for the entire block. It is the same format as the data sent between nodes when synchronizing, with base58 encoding added so that it can be outputted cleanly in the API response.
This is the equivalent of the refund API but can be used by the seller to redeem LTC from a stuck transaction, by supplying the associated AT address, There are no lockTime requirements; it is redeemable as soon as the buyer has redeemed the QORT and sent the secret to the seller.
This is designed to be called by the buyer, and will force refund their P2SH transaction associated with the supplied AT. The tradebot responsible for this trade must be present in the user's db for this API access the necessary data. It must be called after lockTime has passed, which for LTC is currently 60 minutes from the time that the P2SH was funded. Trying to refund before this time will result in a FOREIGN_BLOCKCHAIN_TOO_SOON error.
This can currently be used by either the buyer or the seller, but it requires the seller's trade private key & receiving address to be specified, along with the buyer's secret. Currently hardcoded to LITECOIN but I will aim to make this generic as we start adding more coins.
This makes them more compatible with the output of the /crosschain/tradebot and /crosschain/trade/{ataddress} APIs which is likely where most people will be retrieving data from, rather than the database itself.
This is similar to the BTC equivalent, but removes secretB as an input parameter. It also signs and broadcasts the transaction, because the wallet isn't needed for this. These transactions have to be signed using the tradePrivateKey from the tradebot data rather than any of the wallet's keys.
There are two other LitecoinACCTv1 APIs still to implement, but I will leave these until they are needed.
This tightens up the decision making by adding two requirements:
1. The peer must return the same number of summaries to the ones requested.
2. The peer must return a summary that matches its latest reported signature.
This ensures we are always making sync decisions based on accurate data, and removes peers that are currently mid re-org. This is probably more validation than is actually necessary, but it's best to be really thorough here so it is as optimized as possible.
We have gone backwards and forwards on this one a lot recently, but now that stability has returned, it is best to tighten this up. Previously it was loosened to help reduce network load, but that is no longer a problem. With this stricter approach, it should prevent a node ending up in an incomplete state after syncing, which is the main cause of the shorter re-orgs we are seeing.
The existing HSQL export/import (PERFORM EXPORT SCRIPT and PERFORM IMPORT SCRIPT) have been replaced with a custom JSON import and export. Whilst this is less generic, it has some significant advantages:
- When exporting data, it is now able to combine the exported data with any data that already exists in the backup file. This prevents a backup after a bootstrap from overwriting data from before the bootstrap, and removes the need for all of the "archive" files that we currently create.
- Adds support for partial imports, and updates. Previously an import would fail if any of the data being imported already existed in the db. It will now add new rows and update existing ones.
- The format and contents of the exported trade bot data now matches the output of the /crosschain/tradebot API.
- Data is retrieved without the need for a database lock, and therefore the export process is much faster and less invasive. This should prevent the lockups and other problems seen when using the trade portal.
For now, there are a couple of trade-offs to using this new approach:
- The minting key import/export has been temporarily removed until there is more time to transition it to this new format.
- Existing .script backups can no longer be imported using versions higher than 1.5.1.
Both of these can be solved by temporarily running version 1.5.1, performing the necessary imports/exports, then returning to the latest version. Longer term the minting keys export/import will be reimplemented using the JSON format.
This controls whether to allow connections with peers below minPeerVersion.
If true, we won't sync with them but they can still sync with us, and will show in the peers list. This is the default, which allows older nodes to continue functioning, but prevents them from interfering with the sync behaviour of updated nodes.
If false, sync will be blocked both ways, and they will not appear in the peers list at all.
