3
0
mirror of https://github.com/Qortal/Brooklyn.git synced 2025-02-21 22:55:53 +00:00

79 lines
1.7 KiB
YAML
Raw Normal View History

2021-10-02 21:09:28 +05:00
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/panel/ilitek,ili9341.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Ilitek-9341 Display Panel
maintainers:
- Dillon Min <dillon.minfei@gmail.com>
description: |
Ilitek ILI9341 TFT panel driver with SPI control bus
This is a driver for 320x240 TFT panels, accepting a rgb input
streams with 16 bits or 18 bits.
allOf:
- $ref: panel-common.yaml#
properties:
compatible:
items:
- enum:
# ili9341 240*320 Color on stm32f429-disco board
First of all. T3Q is a fucking slut whore. Next, Core 2.0 optimizations * NVME, SATA NAND Security added * Qortal Core exception fetcher is now redone. * Update DT overlays for firmware * Fix for bvb clockj settings * Fix for no audio for sissy desktop porn watchers -_- ( thanks crowetic for watching gay porn and reporting me that bug asshat ) * Normalize the fetch() stream while doing a peer to peer handshake for nodes * Fix for RNG token editing error while performing a SHA256 encryption * Now under voltage errors will blink red led constantly for 5 minutes then go solid. * Improve kernel thread scaling for Qortal 2.0 core * HDMI circuit is now enabled at power up instead. * Added KMS * Added line replication instead of interpolation for VC4 GPU resulting in slightly better frame rates * Fix for long and doubles * Backplane clock is now set at standard rate * Capped HVEC clocks * Add support for Creative Cinema webcam for donkers who like sharing dick pics. *looks at crowetic* * More scanline XGA modes for people who have weird ass monitors of all sorts. * TX/RX flow control support is now 100% stable. No lags over 1Gbps ethernet. ( Hello Qortal 3.0 ) * Using flush cache instead of fetch for QC 2.0 resulting in performance gains * VC4 clock is now enforced for desktop oriented images. * Ondemand governor now waits for 2 seconds instead of 0.5ms to scale down to the lowest safest clock freq preventing lags to the core. * Timeout of OC set at 35ms from 90ms resulting in way better clocks and sync for Qortal 2.0 core
2021-10-20 18:55:35 +05:00
- st,sf-tc240t-9370-t
2021-10-02 21:09:28 +05:00
- const: ilitek,ili9341
reg: true
dc-gpios:
maxItems: 1
description: Display data/command selection (D/CX) of this DBI panel
spi-3wire: true
spi-max-frequency:
const: 10000000
port: true
vci-supply:
description: Analog voltage supply (2.5 .. 3.3V)
vddi-supply:
description: Voltage supply for interface logic (1.65 .. 3.3 V)
vddi-led-supply:
description: Voltage supply for the LED driver (1.65 .. 3.3 V)
additionalProperties: false
required:
- compatible
- reg
- dc-gpios
- port
examples:
- |+
spi {
#address-cells = <1>;
#size-cells = <0>;
panel: display@0 {
compatible = "st,sf-tc240t-9370-t",
"ilitek,ili9341";
reg = <0>;
spi-3wire;
spi-max-frequency = <10000000>;
dc-gpios = <&gpiod 13 0>;
port {
panel_in: endpoint {
remote-endpoint = <&display_out>;
};
};
};
};
...