Brooklyn/arch/arm/boot/dts/bcm2708-rpi-cm.dts

/dts-v1/;

#include "bcm2708-rpi-cm.dtsi"
#include "bcm283x-rpi-csi0-2lane.dtsi"
#include "bcm283x-rpi-csi1-4lane.dtsi"
#include "bcm283x-rpi-i2c0mux_0_28.dtsi"

/ {
	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
	model = "Raspberry Pi Compute Module";

	cam1_reg: cam1_reg {
		compatible = "regulator-fixed";
		regulator-name = "cam1-regulator";
		gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		status = "disabled";
	};
	cam0_reg: cam0_reg {
		compatible = "regulator-fixed";
		regulator-name = "cam0-regulator";
		gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		status = "disabled";
	};
};

&uart0 {
	status = "okay";
};

&gpio {
	spi0_pins: spi0_pins {
		brcm,pins = <9 10 11>;
		brcm,function = <4>; /* alt0 */
	};

	spi0_cs_pins: spi0_cs_pins {
		brcm,pins = <8 7>;
		brcm,function = <1>; /* output */
	};

	i2c0_pins: i2c0 {
		brcm,pins = <0 1>;
		brcm,function = <4>;
	};

	i2c1_pins: i2c1 {
		brcm,pins = <2 3>;
		brcm,function = <4>;
	};

	i2s_pins: i2s {
		brcm,pins = <18 19 20 21>;
		brcm,function = <4>; /* alt0 */
	};

	audio_pins: audio_pins {
		brcm,pins;
		brcm,function;
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
	cs-gpios = <&gpio 8 1>, <&gpio 7 1>;

	spidev0: spidev@0{
		compatible = "spidev";
		reg = <0>;	/* CE0 */
		#address-cells = <1>;
		#size-cells = <0>;
		spi-max-frequency = <125000000>;
	};

	spidev1: spidev@1{
		compatible = "spidev";
		reg = <1>;	/* CE1 */
		#address-cells = <1>;
		#size-cells = <0>;
		spi-max-frequency = <125000000>;
	};
};

&i2c0if {
	clock-frequency = <100000>;
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&i2c1_pins>;
	clock-frequency = <100000>;
};

&i2c2 {
	clock-frequency = <100000>;
};

&i2s {
	pinctrl-names = "default";
	pinctrl-0 = <&i2s_pins>;
};

&audio {
	pinctrl-names = "default";
	pinctrl-0 = <&audio_pins>;
};

&hdmi {
	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
};