* V1.1a should be based on e17 sicne GPU issue is fixed
* V1.2 will be based on communinty demand
D: Raziel A. Crowe aka Scare Crowe
M: Sean Torchy aka Moose on the loose
A: Jason A. Crowe aka Crowetic
X: Netflix & Chill
GNUK Token Implementation
Source: http://www.gniibe.org
SWD port
(GND, SWD-CLK, SWD-IO)
Power port +---------------------+
Vdd |[] []()() -------+
GND |[] | |
|()() I/O port | USB |
| (PA2, PA3) | |
| -------+
+---------------------+
http://git.gniibe.org/gitweb/?p=gnuk/fst-01.git
If you rely heavily on VPN to bypass your regional filters then it will be a good idea to have extra entropy in hand. Any OpenSource Entropy stick should work on Brooklyn from now.
Note: Use raspi-config to setup your wifi or add plamsa desktop network manager with "sudo apt install plasma-nm" . It is assumed that you will be using an ethernet/network cable or keyboard and mouse to setup and configure your desktop. For headless image, you only need SSH access to your hardwired device.
You can get a release and flash it directly on your USB 3 hard drive with Balena Etcher. The default image size is meant for a 32GB microSD card. If you have a bigger microSD card then after login do a "sudo raspi-config", head over to Advacned and resize the file system. Same can be done for a GPT partitioned USB 3 hard drive/SSD. Keep in mind that MBR drives have a size limit per block partition. For 4TB or bigger drive you might want to use GPT instead. If you have purchased a Raspberry Pi 4 elsewhere then you might have to flash the boot loader to do a mass storaeg boot. Ask The Moose on the loose for help.
Want to send some tip for continued development or features / apps ported on Brooklyn?
