/* Copyright (c) 2018, Raspberry Pi (Trading) Ltd. Copyright (c) 2014, DSP Group Ltd. Copyright (c) 2014, James Hughes Copyright (c) 2013, Broadcom Europe Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /** * \file RaspiVidYUV.c * Command line program to capture a camera video stream and save file * as uncompressed YUV420 data * Also optionally display a preview/viewfinder of current camera input. * * Description * * 2 components are created; camera and preview. * Camera component has three ports, preview, video and stills. * Preview is connected using standard mmal connections, the video output * is written straight to the file in YUV 420 format via the requisite buffer * callback. Still port is not used * * We use the RaspiCamControl code to handle the specific camera settings. * We use the RaspiPreview code to handle the generic preview */ // We use some GNU extensions (basename) #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif #include #include #include #include #include #include #include #include #include #include #include "bcm_host.h" #include "interface/vcos/vcos.h" #include "interface/mmal/mmal.h" #include "interface/mmal/mmal_logging.h" #include "interface/mmal/mmal_buffer.h" #include "interface/mmal/util/mmal_util.h" #include "interface/mmal/util/mmal_util_params.h" #include "interface/mmal/util/mmal_default_components.h" #include "interface/mmal/util/mmal_connection.h" #include "RaspiCommonSettings.h" #include "RaspiCamControl.h" #include "RaspiPreview.h" #include "RaspiCLI.h" #include "RaspiHelpers.h" #include "RaspiGPS.h" #include // Standard port setting for the camera component #define MMAL_CAMERA_PREVIEW_PORT 0 #define MMAL_CAMERA_VIDEO_PORT 1 #define MMAL_CAMERA_CAPTURE_PORT 2 // Video format information // 0 implies variable #define VIDEO_FRAME_RATE_NUM 30 #define VIDEO_FRAME_RATE_DEN 1 /// Video render needs at least 2 buffers. #define VIDEO_OUTPUT_BUFFERS_NUM 3 /// Interval at which we check for an failure abort during capture const int ABORT_INTERVAL = 100; // ms /// Capture/Pause switch method enum { WAIT_METHOD_NONE, /// Simply capture for time specified WAIT_METHOD_TIMED, /// Cycle between capture and pause for times specified WAIT_METHOD_KEYPRESS, /// Switch between capture and pause on keypress WAIT_METHOD_SIGNAL, /// Switch between capture and pause on signal WAIT_METHOD_FOREVER /// Run/record forever }; // Forward typedef struct RASPIVIDYUV_STATE_S RASPIVIDYUV_STATE; /** Struct used to pass information in camera video port userdata to callback */ typedef struct { FILE *file_handle; /// File handle to write buffer data to. RASPIVIDYUV_STATE *pstate; /// pointer to our state in case required in callback int abort; /// Set to 1 in callback if an error occurs to attempt to abort the capture FILE *pts_file_handle; /// File timestamps int frame; int64_t starttime; int64_t lasttime; } PORT_USERDATA; /** Structure containing all state information for the current run */ struct RASPIVIDYUV_STATE_S { RASPICOMMONSETTINGS_PARAMETERS common_settings; int timeout; /// Time taken before frame is grabbed and app then shuts down. Units are milliseconds int framerate; /// Requested frame rate (fps) int demoMode; /// Run app in demo mode int demoInterval; /// Interval between camera settings changes int waitMethod; /// Method for switching between pause and capture int onTime; /// In timed cycle mode, the amount of time the capture is on per cycle int offTime; /// In timed cycle mode, the amount of time the capture is off per cycle int onlyLuma; /// Only output the luma / Y plane of the YUV data int useRGB; /// Output RGB data rather than YUV RASPIPREVIEW_PARAMETERS preview_parameters; /// Preview setup parameters RASPICAM_CAMERA_PARAMETERS camera_parameters; /// Camera setup parameters MMAL_COMPONENT_T *camera_component; /// Pointer to the camera component MMAL_CONNECTION_T *preview_connection; /// Pointer to the connection from camera to preview MMAL_POOL_T *camera_pool; /// Pointer to the pool of buffers used by camera video port PORT_USERDATA callback_data; /// Used to move data to the camera callback int bCapturing; /// State of capture/pause int frame; char *pts_filename; int save_pts; int64_t starttime; int64_t lasttime; bool netListen; }; static XREF_T initial_map[] = { {"record", 0}, {"pause", 1}, }; static int initial_map_size = sizeof(initial_map) / sizeof(initial_map[0]); /// Command ID's and Structure defining our command line options enum { CommandTimeout, CommandDemoMode, CommandFramerate, CommandTimed, CommandSignal, CommandKeypress, CommandInitialState, CommandOnlyLuma, CommandUseRGB, CommandSavePTS, CommandNetListen }; static COMMAND_LIST cmdline_commands[] = { { CommandTimeout, "-timeout", "t", "Time (in ms) to capture for. If not specified, set to 5s. Zero to disable", 1 }, { CommandDemoMode, "-demo", "d", "Run a demo mode (cycle through range of camera options, no capture)", 1}, { CommandFramerate, "-framerate", "fps","Specify the frames per second to record", 1}, { CommandTimed, "-timed", "td", "Cycle between capture and pause. -cycle on,off where on is record time and off is pause time in ms", 0}, { CommandSignal, "-signal", "s", "Cycle between capture and pause on Signal", 0}, { CommandKeypress, "-keypress", "k", "Cycle between capture and pause on ENTER", 0}, { CommandInitialState, "-initial", "i", "Initial state. Use 'record' or 'pause'. Default 'record'", 1}, { CommandOnlyLuma, "-luma", "y", "Only output the luma / Y of the YUV data'", 0}, { CommandUseRGB, "-rgb", "rgb","Save as RGB data rather than YUV", 0}, { CommandSavePTS, "-save-pts", "pts","Save Timestamps to file", 1 }, { CommandNetListen, "-listen", "l", "Listen on a TCP socket", 0}, }; static int cmdline_commands_size = sizeof(cmdline_commands) / sizeof(cmdline_commands[0]); static struct { char *description; int nextWaitMethod; } wait_method_description[] = { {"Simple capture", WAIT_METHOD_NONE}, {"Capture forever", WAIT_METHOD_FOREVER}, {"Cycle on time", WAIT_METHOD_TIMED}, {"Cycle on keypress", WAIT_METHOD_KEYPRESS}, {"Cycle on signal", WAIT_METHOD_SIGNAL}, }; static int wait_method_description_size = sizeof(wait_method_description) / sizeof(wait_method_description[0]); /** * Assign a default set of parameters to the state passed in * * @param state Pointer to state structure to assign defaults to */ static void default_status(RASPIVIDYUV_STATE *state) { if (!state) { vcos_assert(0); return; } // Default everything to zero memset(state, 0, sizeof(RASPIVIDYUV_STATE)); raspicommonsettings_set_defaults(&state->common_settings); // Now set anything non-zero state->timeout = -1; // replaced with 5000ms later if unset state->common_settings.width = 1920; // Default to 1080p state->common_settings.height = 1080; state->framerate = VIDEO_FRAME_RATE_NUM; state->demoMode = 0; state->demoInterval = 250; // ms state->waitMethod = WAIT_METHOD_NONE; state->onTime = 5000; state->offTime = 5000; state->bCapturing = 0; state->onlyLuma = 0; // Setup preview window defaults raspipreview_set_defaults(&state->preview_parameters); // Set up the camera_parameters to default raspicamcontrol_set_defaults(&state->camera_parameters); } /** * Dump image state parameters to stderr. * * @param state Pointer to state structure to assign defaults to */ static void dump_status(RASPIVIDYUV_STATE *state) { int i, size, ystride, yheight; if (!state) { vcos_assert(0); return; } raspicommonsettings_dump_parameters(&state->common_settings); fprintf(stderr, "framerate %d, time delay %d\n", state->framerate, state->timeout); // Calculate the individual image size // Y stride rounded to multiple of 32. U&V stride is Y stride/2 (ie multiple of 16). // Y height is padded to a 16. U/V height is Y height/2 (ie multiple of 8). // Y plane ystride = ((state->common_settings.width + 31) & ~31); yheight = ((state->common_settings.height + 15) & ~15); size = ystride * yheight; // U and V plane size += 2 * ystride/2 * yheight/2; fprintf(stderr, "Sub-image size %d bytes in total.\n Y pitch %d, Y height %d, UV pitch %d, UV Height %d\n", size, ystride, yheight, ystride/2,yheight/2); fprintf(stderr, "Wait method : "); for (i=0; iwaitMethod == wait_method_description[i].nextWaitMethod) fprintf(stderr, "%s", wait_method_description[i].description); } fprintf(stderr, "\nInitial state '%s'\n", raspicli_unmap_xref(state->bCapturing, initial_map, initial_map_size)); fprintf(stderr, "\n"); raspipreview_dump_parameters(&state->preview_parameters); raspicamcontrol_dump_parameters(&state->camera_parameters); } /** * Display usage information for the application to stdout * * @param app_name String to display as the application name */ static void application_help_message(char *app_name) { fprintf(stdout, "Display camera output to display, and optionally saves an uncompressed YUV420 or RGB file \n\n"); fprintf(stdout, "NOTE: High resolutions and/or frame rates may exceed the bandwidth of the system due\n"); fprintf(stdout, "to the large amounts of data being moved to the SD card. This will result in undefined\n"); fprintf(stdout, "results in the subsequent file.\n"); fprintf(stdout, "The single raw file produced contains all the images. Each image in the files will be of size\n"); fprintf(stdout, "width*height*1.5 for YUV or width*height*3 for RGB, unless width and/or height are not divisible by 16."); fprintf(stdout, "Use the image size displayed during the run (in verbose mode) for an accurate value\n"); fprintf(stdout, "The Linux split command can be used to split up the file to individual frames\n"); fprintf(stdout, "\nusage: %s [options]\n\n", app_name); fprintf(stdout, "Image parameter commands\n\n"); raspicli_display_help(cmdline_commands, cmdline_commands_size); fprintf(stdout, "\n"); return; } /** * Parse the incoming command line and put resulting parameters in to the state * * @param argc Number of arguments in command line * @param argv Array of pointers to strings from command line * @param state Pointer to state structure to assign any discovered parameters to * @return Non-0 if failed for some reason, 0 otherwise */ static int parse_cmdline(int argc, const char **argv, RASPIVIDYUV_STATE *state) { // Parse the command line arguments. // We are looking for -- or - int valid = 1; int i; for (i = 1; i < argc && valid; i++) { int command_id, num_parameters; if (!argv[i]) continue; if (argv[i][0] != '-') { valid = 0; continue; } // Assume parameter is valid until proven otherwise valid = 1; command_id = raspicli_get_command_id(cmdline_commands, cmdline_commands_size, &argv[i][1], &num_parameters); // If we found a command but are missing a parameter, continue (and we will drop out of the loop) if (command_id != -1 && num_parameters > 0 && (i + 1 >= argc) ) continue; // We are now dealing with a command line option switch (command_id) { case CommandTimeout: // Time to run viewfinder/capture { if (sscanf(argv[i + 1], "%d", &state->timeout) == 1) { // Ensure that if previously selected a waitMethod we don't overwrite it if (state->timeout == 0 && state->waitMethod == WAIT_METHOD_NONE) state->waitMethod = WAIT_METHOD_FOREVER; i++; } else valid = 0; break; } case CommandDemoMode: // Run in demo mode - no capture { // Demo mode might have a timing parameter // so check if a) we have another parameter, b) its not the start of the next option if (i + 1 < argc && argv[i+1][0] != '-') { if (sscanf(argv[i + 1], "%u", &state->demoInterval) == 1) { // TODO : What limits do we need for timeout? if (state->demoInterval == 0) state->demoInterval = 250; // ms state->demoMode = 1; i++; } else valid = 0; } else { state->demoMode = 1; } break; } case CommandFramerate: // fps to record { if (sscanf(argv[i + 1], "%u", &state->framerate) == 1) { // TODO : What limits do we need for fps 1 - 30 - 120?? i++; } else valid = 0; break; } case CommandTimed: { if (sscanf(argv[i + 1], "%u,%u", &state->onTime, &state->offTime) == 2) { i++; if (state->onTime < 1000) state->onTime = 1000; if (state->offTime < 1000) state->offTime = 1000; state->waitMethod = WAIT_METHOD_TIMED; if (state->timeout == -1) state->timeout = 0; } else valid = 0; break; } case CommandKeypress: state->waitMethod = WAIT_METHOD_KEYPRESS; if (state->timeout == -1) state->timeout = 0; break; case CommandSignal: state->waitMethod = WAIT_METHOD_SIGNAL; // Reenable the signal signal(SIGUSR1, default_signal_handler); if (state->timeout == -1) state->timeout = 0; break; case CommandInitialState: { state->bCapturing = raspicli_map_xref(argv[i + 1], initial_map, initial_map_size); if( state->bCapturing == -1) state->bCapturing = 0; i++; break; } case CommandOnlyLuma: if (state->useRGB) { fprintf(stderr, "--luma and --rgb are mutually exclusive\n"); valid = 0; } state->onlyLuma = 1; break; case CommandUseRGB: // display lots of data during run if (state->onlyLuma) { fprintf(stderr, "--luma and --rgb are mutually exclusive\n"); valid = 0; } state->useRGB = 1; break; case CommandSavePTS: // output filename { state->save_pts = 1; int len = strlen(argv[i + 1]); if (len) { state->pts_filename = malloc(len + 1); vcos_assert(state->pts_filename); if (state->pts_filename) strncpy(state->pts_filename, argv[i + 1], len+1); i++; } else valid = 0; break; } case CommandNetListen: { state->netListen = true; break; } default: { // Try parsing for any image specific parameters // result indicates how many parameters were used up, 0,1,2 // but we adjust by -1 as we have used one already const char *second_arg = (i + 1 < argc) ? argv[i + 1] : NULL; int parms_used = (raspicamcontrol_parse_cmdline(&state->camera_parameters, &argv[i][1], second_arg)); // Still unused, try common settings if (!parms_used) parms_used = raspicommonsettings_parse_cmdline(&state->common_settings, &argv[i][1], second_arg, &application_help_message); // Still unused, try preview options if (!parms_used) parms_used = raspipreview_parse_cmdline(&state->preview_parameters, &argv[i][1], second_arg); // If no parms were used, this must be a bad parameters if (!parms_used) valid = 0; else i += parms_used - 1; break; } } } if (!valid) { fprintf(stderr, "Invalid command line option (%s)\n", argv[i-1]); return 1; } return 0; } /** * Open a file based on the settings in state * * @param state Pointer to state */ static FILE *open_filename(RASPIVIDYUV_STATE *pState, char *filename) { FILE *new_handle = NULL; if (filename) { bool bNetwork = false; int sfd = -1, socktype; if(!strncmp("tcp://", filename, 6)) { bNetwork = true; socktype = SOCK_STREAM; } else if(!strncmp("udp://", filename, 6)) { if (pState->netListen) { fprintf(stderr, "No support for listening in UDP mode\n"); exit(131); } bNetwork = true; socktype = SOCK_DGRAM; } if(bNetwork) { unsigned short port; filename += 6; char *colon; if(NULL == (colon = strchr(filename, ':'))) { fprintf(stderr, "%s is not a valid IPv4:port, use something like tcp://1.2.3.4:1234 or udp://1.2.3.4:1234\n", filename); exit(132); } if(1 != sscanf(colon + 1, "%hu", &port)) { fprintf(stderr, "Port parse failed. %s is not a valid network file name, use something like tcp://1.2.3.4:1234 or udp://1.2.3.4:1234\n", filename); exit(133); } char chTmp = *colon; *colon = 0; struct sockaddr_in saddr= {}; saddr.sin_family = AF_INET; saddr.sin_port = htons(port); if(0 == inet_aton(filename, &saddr.sin_addr)) { fprintf(stderr, "inet_aton failed. %s is not a valid IPv4 address\n", filename); exit(134); } *colon = chTmp; if (pState->netListen) { int sockListen = socket(AF_INET, SOCK_STREAM, 0); if (sockListen >= 0) { int iTmp = 1; setsockopt(sockListen, SOL_SOCKET, SO_REUSEADDR, &iTmp, sizeof(int));//no error handling, just go on if (bind(sockListen, (struct sockaddr *) &saddr, sizeof(saddr)) >= 0) { while ((-1 == (iTmp = listen(sockListen, 0))) && (EINTR == errno)) ; if (-1 != iTmp) { fprintf(stderr, "Waiting for a TCP connection on %s:%"SCNu16"...", inet_ntoa(saddr.sin_addr), ntohs(saddr.sin_port)); struct sockaddr_in cli_addr; socklen_t clilen = sizeof(cli_addr); while ((-1 == (sfd = accept(sockListen, (struct sockaddr *) &cli_addr, &clilen))) && (EINTR == errno)) ; if (sfd >= 0) fprintf(stderr, "Client connected from %s:%"SCNu16"\n", inet_ntoa(cli_addr.sin_addr), ntohs(cli_addr.sin_port)); else fprintf(stderr, "Error on accept: %s\n", strerror(errno)); } else//if (-1 != iTmp) { fprintf(stderr, "Error trying to listen on a socket: %s\n", strerror(errno)); } } else//if (bind(sockListen, (struct sockaddr *) &saddr, sizeof(saddr)) >= 0) { fprintf(stderr, "Error on binding socket: %s\n", strerror(errno)); } } else//if (sockListen >= 0) { fprintf(stderr, "Error creating socket: %s\n", strerror(errno)); } if (sockListen >= 0)//regardless success or error close(sockListen);//do not listen on a given port anymore } else//if (pState->netListen) { if(0 <= (sfd = socket(AF_INET, socktype, 0))) { fprintf(stderr, "Connecting to %s:%hu...", inet_ntoa(saddr.sin_addr), port); int iTmp = 1; while ((-1 == (iTmp = connect(sfd, (struct sockaddr *) &saddr, sizeof(struct sockaddr_in)))) && (EINTR == errno)) ; if (iTmp < 0) fprintf(stderr, "error: %s\n", strerror(errno)); else fprintf(stderr, "connected, sending video...\n"); } else fprintf(stderr, "Error creating socket: %s\n", strerror(errno)); } if (sfd >= 0) new_handle = fdopen(sfd, "w"); } else { new_handle = fopen(filename, "wb"); } } if (pState->common_settings.verbose) { if (new_handle) fprintf(stderr, "Opening output file \"%s\"\n", filename); else fprintf(stderr, "Failed to open new file \"%s\"\n", filename); } return new_handle; } /** * buffer header callback function for camera * * Callback will dump buffer data to internal buffer * * @param port Pointer to port from which callback originated * @param buffer mmal buffer header pointer */ static void camera_buffer_callback(MMAL_PORT_T *port, MMAL_BUFFER_HEADER_T *buffer) { MMAL_BUFFER_HEADER_T *new_buffer; static int64_t last_second = -1; // We pass our file handle and other stuff in via the userdata field. PORT_USERDATA *pData = (PORT_USERDATA *)port->userdata; RASPIVIDYUV_STATE *pstate = pData->pstate; if (pData) { int bytes_written = 0; int bytes_to_write = buffer->length; int64_t current_time = get_microseconds64()/1000000; if (pstate->onlyLuma) bytes_to_write = vcos_min(buffer->length, port->format->es->video.width * port->format->es->video.height); vcos_assert(pData->file_handle); if (bytes_to_write) { mmal_buffer_header_mem_lock(buffer); bytes_written = fwrite(buffer->data, 1, bytes_to_write, pData->file_handle); mmal_buffer_header_mem_unlock(buffer); if (bytes_written != bytes_to_write) { vcos_log_error("Failed to write buffer data (%d from %d)- aborting", bytes_written, bytes_to_write); pData->abort = 1; } if (pData->pts_file_handle) { // Every buffer should be a complete frame, so no need to worry about // fragments or duplicated timestamps. We're also in RESET_STC mode, so // the time on frame 0 should always be 0 anyway, but simply copy the // code from raspivid. // MMAL_TIME_UNKNOWN should never happen, but it'll corrupt the timestamps // file if saved. if(buffer->pts != MMAL_TIME_UNKNOWN) { int64_t pts; if(pstate->frame==0) pstate->starttime=buffer->pts; pData->lasttime=buffer->pts; pts = buffer->pts - pData->starttime; fprintf(pData->pts_file_handle,"%lld.%03lld\n", pts/1000, pts%1000); pData->frame++; } } } // See if the second count has changed and we need to update any annotation if (current_time != last_second) { if ((pstate->camera_parameters.enable_annotate & ANNOTATE_APP_TEXT) && pstate->common_settings.gps) { char *text = raspi_gps_location_string(); raspicamcontrol_set_annotate(pstate->camera_component, pstate->camera_parameters.enable_annotate, text, pstate->camera_parameters.annotate_text_size, pstate->camera_parameters.annotate_text_colour, pstate->camera_parameters.annotate_bg_colour, pstate->camera_parameters.annotate_justify, pstate->camera_parameters.annotate_x, pstate->camera_parameters.annotate_y ); free(text); } else raspicamcontrol_set_annotate(pstate->camera_component, pstate->camera_parameters.enable_annotate, pstate->camera_parameters.annotate_string, pstate->camera_parameters.annotate_text_size, pstate->camera_parameters.annotate_text_colour, pstate->camera_parameters.annotate_bg_colour, pstate->camera_parameters.annotate_justify, pstate->camera_parameters.annotate_x, pstate->camera_parameters.annotate_y ); last_second = current_time; } } else { vcos_log_error("Received a camera buffer callback with no state"); } // release buffer back to the pool mmal_buffer_header_release(buffer); // and send one back to the port (if still open) if (port->is_enabled) { MMAL_STATUS_T status; new_buffer = mmal_queue_get(pData->pstate->camera_pool->queue); if (new_buffer) status = mmal_port_send_buffer(port, new_buffer); if (!new_buffer || status != MMAL_SUCCESS) vcos_log_error("Unable to return a buffer to the camera port"); } } /** * Create the camera component, set up its ports * * @param state Pointer to state control struct * * @return MMAL_SUCCESS if all OK, something else otherwise * */ static MMAL_STATUS_T create_camera_component(RASPIVIDYUV_STATE *state) { MMAL_COMPONENT_T *camera = 0; MMAL_ES_FORMAT_T *format; MMAL_PORT_T *preview_port = NULL, *video_port = NULL, *still_port = NULL; MMAL_STATUS_T status; MMAL_POOL_T *pool; /* Create the component */ status = mmal_component_create(MMAL_COMPONENT_DEFAULT_CAMERA, &camera); if (status != MMAL_SUCCESS) { vcos_log_error("Failed to create camera component"); goto error; } status = raspicamcontrol_set_stereo_mode(camera->output[0], &state->camera_parameters.stereo_mode); status += raspicamcontrol_set_stereo_mode(camera->output[1], &state->camera_parameters.stereo_mode); status += raspicamcontrol_set_stereo_mode(camera->output[2], &state->camera_parameters.stereo_mode); if (status != MMAL_SUCCESS) { vcos_log_error("Could not set stereo mode : error %d", status); goto error; } MMAL_PARAMETER_INT32_T camera_num = {{MMAL_PARAMETER_CAMERA_NUM, sizeof(camera_num)}, state->common_settings.cameraNum}; status = mmal_port_parameter_set(camera->control, &camera_num.hdr); if (status != MMAL_SUCCESS) { vcos_log_error("Could not select camera : error %d", status); goto error; } if (!camera->output_num) { status = MMAL_ENOSYS; vcos_log_error("Camera doesn't have output ports"); goto error; } status = mmal_port_parameter_set_uint32(camera->control, MMAL_PARAMETER_CAMERA_CUSTOM_SENSOR_CONFIG, state->common_settings.sensor_mode); if (status != MMAL_SUCCESS) { vcos_log_error("Could not set sensor mode : error %d", status); goto error; } preview_port = camera->output[MMAL_CAMERA_PREVIEW_PORT]; video_port = camera->output[MMAL_CAMERA_VIDEO_PORT]; still_port = camera->output[MMAL_CAMERA_CAPTURE_PORT]; // Enable the camera, and tell it its control callback function status = mmal_port_enable(camera->control, default_camera_control_callback); if (status != MMAL_SUCCESS) { vcos_log_error("Unable to enable control port : error %d", status); goto error; } // set up the camera configuration { MMAL_PARAMETER_CAMERA_CONFIG_T cam_config = { { MMAL_PARAMETER_CAMERA_CONFIG, sizeof(cam_config) }, .max_stills_w = state->common_settings.width, .max_stills_h = state->common_settings.height, .stills_yuv422 = 0, .one_shot_stills = 0, .max_preview_video_w = state->common_settings.width, .max_preview_video_h = state->common_settings.height, .num_preview_video_frames = 3, .stills_capture_circular_buffer_height = 0, .fast_preview_resume = 0, .use_stc_timestamp = MMAL_PARAM_TIMESTAMP_MODE_RESET_STC }; mmal_port_parameter_set(camera->control, &cam_config.hdr); } // Now set up the port formats // Set the encode format on the Preview port // HW limitations mean we need the preview to be the same size as the required recorded output format = preview_port->format; if(state->camera_parameters.shutter_speed > 6000000) { MMAL_PARAMETER_FPS_RANGE_T fps_range = {{MMAL_PARAMETER_FPS_RANGE, sizeof(fps_range)}, { 5, 1000 }, {166, 1000} }; mmal_port_parameter_set(preview_port, &fps_range.hdr); } else if(state->camera_parameters.shutter_speed > 1000000) { MMAL_PARAMETER_FPS_RANGE_T fps_range = {{MMAL_PARAMETER_FPS_RANGE, sizeof(fps_range)}, { 166, 1000 }, {999, 1000} }; mmal_port_parameter_set(preview_port, &fps_range.hdr); } //enable dynamic framerate if necessary if (state->camera_parameters.shutter_speed) { if (state->framerate > 1000000./state->camera_parameters.shutter_speed) { state->framerate=0; if (state->common_settings.verbose) fprintf(stderr, "Enable dynamic frame rate to fulfil shutter speed requirement\n"); } } format->encoding = MMAL_ENCODING_OPAQUE; format->es->video.width = VCOS_ALIGN_UP(state->common_settings.width, 32); format->es->video.height = VCOS_ALIGN_UP(state->common_settings.height, 16); format->es->video.crop.x = 0; format->es->video.crop.y = 0; format->es->video.crop.width = state->common_settings.width; format->es->video.crop.height = state->common_settings.height; format->es->video.frame_rate.num = state->framerate; format->es->video.frame_rate.den = VIDEO_FRAME_RATE_DEN; status = mmal_port_format_commit(preview_port); if (status != MMAL_SUCCESS) { vcos_log_error("camera viewfinder format couldn't be set"); goto error; } // Set the encode format on the video port format = video_port->format; if(state->camera_parameters.shutter_speed > 6000000) { MMAL_PARAMETER_FPS_RANGE_T fps_range = {{MMAL_PARAMETER_FPS_RANGE, sizeof(fps_range)}, { 5, 1000 }, {166, 1000} }; mmal_port_parameter_set(video_port, &fps_range.hdr); } else if(state->camera_parameters.shutter_speed > 1000000) { MMAL_PARAMETER_FPS_RANGE_T fps_range = {{MMAL_PARAMETER_FPS_RANGE, sizeof(fps_range)}, { 167, 1000 }, {999, 1000} }; mmal_port_parameter_set(video_port, &fps_range.hdr); } if (state->useRGB) { format->encoding = mmal_util_rgb_order_fixed(still_port) ? MMAL_ENCODING_RGB24 : MMAL_ENCODING_BGR24; format->encoding_variant = 0; //Irrelevant when not in opaque mode } else { format->encoding = MMAL_ENCODING_I420; format->encoding_variant = MMAL_ENCODING_I420; } format->es->video.width = VCOS_ALIGN_UP(state->common_settings.width, 32); format->es->video.height = VCOS_ALIGN_UP(state->common_settings.height, 16); format->es->video.crop.x = 0; format->es->video.crop.y = 0; format->es->video.crop.width = state->common_settings.width; format->es->video.crop.height = state->common_settings.height; format->es->video.frame_rate.num = state->framerate; format->es->video.frame_rate.den = VIDEO_FRAME_RATE_DEN; status = mmal_port_format_commit(video_port); if (status != MMAL_SUCCESS) { vcos_log_error("camera video format couldn't be set"); goto error; } // Ensure there are enough buffers to avoid dropping frames if (video_port->buffer_num < VIDEO_OUTPUT_BUFFERS_NUM) video_port->buffer_num = VIDEO_OUTPUT_BUFFERS_NUM; status = mmal_port_parameter_set_boolean(video_port, MMAL_PARAMETER_ZERO_COPY, MMAL_TRUE); if (status != MMAL_SUCCESS) { vcos_log_error("Failed to select zero copy"); goto error; } // Set the encode format on the still port format = still_port->format; format->encoding = MMAL_ENCODING_OPAQUE; format->encoding_variant = MMAL_ENCODING_I420; format->es->video.width = VCOS_ALIGN_UP(state->common_settings.width, 32); format->es->video.height = VCOS_ALIGN_UP(state->common_settings.height, 16); format->es->video.crop.x = 0; format->es->video.crop.y = 0; format->es->video.crop.width = state->common_settings.width; format->es->video.crop.height = state->common_settings.height; format->es->video.frame_rate.num = 0; format->es->video.frame_rate.den = 1; status = mmal_port_format_commit(still_port); if (status != MMAL_SUCCESS) { vcos_log_error("camera still format couldn't be set"); goto error; } /* Ensure there are enough buffers to avoid dropping frames */ if (still_port->buffer_num < VIDEO_OUTPUT_BUFFERS_NUM) still_port->buffer_num = VIDEO_OUTPUT_BUFFERS_NUM; /* Enable component */ status = mmal_component_enable(camera); if (status != MMAL_SUCCESS) { vcos_log_error("camera component couldn't be enabled"); goto error; } raspicamcontrol_set_all_parameters(camera, &state->camera_parameters); /* Create pool of buffer headers for the output port to consume */ pool = mmal_port_pool_create(video_port, video_port->buffer_num, video_port->buffer_size); if (!pool) { vcos_log_error("Failed to create buffer header pool for camera still port %s", still_port->name); } state->camera_pool = pool; state->camera_component = camera; if (state->common_settings.verbose) fprintf(stderr, "Camera component done\n"); return status; error: if (camera) mmal_component_destroy(camera); return status; } /** * Destroy the camera component * * @param state Pointer to state control struct * */ static void destroy_camera_component(RASPIVIDYUV_STATE *state) { if (state->camera_component) { mmal_component_destroy(state->camera_component); state->camera_component = NULL; } } /** * Pause for specified time, but return early if detect an abort request * * @param state Pointer to state control struct * @param pause Time in ms to pause * @param callback Struct contain an abort flag tested for early termination * */ static int pause_and_test_abort(RASPIVIDYUV_STATE *state, int pause) { int wait; if (!pause) return 0; // Going to check every ABORT_INTERVAL milliseconds for (wait = 0; wait < pause; wait+= ABORT_INTERVAL) { vcos_sleep(ABORT_INTERVAL); if (state->callback_data.abort) return 1; } return 0; } /** * Function to wait in various ways (depending on settings) * * @param state Pointer to the state data * * @return !0 if to continue, 0 if reached end of run */ static int wait_for_next_change(RASPIVIDYUV_STATE *state) { int keep_running = 1; static int64_t complete_time = -1; // Have we actually exceeded our timeout? int64_t current_time = get_microseconds64()/1000; if (complete_time == -1) complete_time = current_time + state->timeout; // if we have run out of time, flag we need to exit if (current_time >= complete_time && state->timeout != 0) keep_running = 0; switch (state->waitMethod) { case WAIT_METHOD_NONE: (void)pause_and_test_abort(state, state->timeout); return 0; case WAIT_METHOD_FOREVER: { // We never return from this. Expect a ctrl-c to exit or abort. while (!state->callback_data.abort) // Have a sleep so we don't hog the CPU. vcos_sleep(ABORT_INTERVAL); return 0; } case WAIT_METHOD_TIMED: { int abort; if (state->bCapturing) abort = pause_and_test_abort(state, state->onTime); else abort = pause_and_test_abort(state, state->offTime); if (abort) return 0; else return keep_running; } case WAIT_METHOD_KEYPRESS: { char ch; if (state->common_settings.verbose) fprintf(stderr, "Press Enter to %s, X then ENTER to exit\n", state->bCapturing ? "pause" : "capture"); ch = getchar(); if (ch == 'x' || ch == 'X') return 0; else return keep_running; } case WAIT_METHOD_SIGNAL: { // Need to wait for a SIGUSR1 signal sigset_t waitset; int sig; int result = 0; sigemptyset( &waitset ); sigaddset( &waitset, SIGUSR1 ); // We are multi threaded because we use mmal, so need to use the pthread // variant of procmask to block SIGUSR1 so we can wait on it. pthread_sigmask( SIG_BLOCK, &waitset, NULL ); if (state->common_settings.verbose) { fprintf(stderr, "Waiting for SIGUSR1 to %s\n", state->bCapturing ? "pause" : "capture"); } result = sigwait( &waitset, &sig ); if (state->common_settings.verbose && result != 0) fprintf(stderr, "Bad signal received - error %d\n", errno); return keep_running; } } // switch return keep_running; } /** * main */ int main(int argc, const char **argv) { // Our main data storage vessel.. RASPIVIDYUV_STATE state; int exit_code = EX_OK; MMAL_STATUS_T status = MMAL_SUCCESS; MMAL_PORT_T *camera_preview_port = NULL; MMAL_PORT_T *camera_video_port = NULL; MMAL_PORT_T *camera_still_port = NULL; MMAL_PORT_T *preview_input_port = NULL; bcm_host_init(); // Register our application with the logging system vcos_log_register("RaspiVid", VCOS_LOG_CATEGORY); signal(SIGINT, default_signal_handler); // Disable USR1 for the moment - may be reenabled if go in to signal capture mode signal(SIGUSR1, SIG_IGN); set_app_name(argv[0]); // Do we have any parameters if (argc == 1) { display_valid_parameters(basename(get_app_name()), &application_help_message); exit(EX_USAGE); } default_status(&state); // Parse the command line and put options in to our status structure if (parse_cmdline(argc, argv, &state)) { status = -1; exit(EX_USAGE); } if (state.timeout == -1) state.timeout = 5000; // Setup for sensor specific parameters, only set W/H settings if zero on entry get_sensor_defaults(state.common_settings.cameraNum, state.common_settings.camera_name, &state.common_settings.width, &state.common_settings.height); if (state.common_settings.verbose) { print_app_details(stderr); dump_status(&state); } if (state.common_settings.gps) if (raspi_gps_setup(state.common_settings.verbose)) state.common_settings.gps = false; // OK, we have a nice set of parameters. Now set up our components // We have two components. Camera, Preview if ((status = create_camera_component(&state)) != MMAL_SUCCESS) { vcos_log_error("%s: Failed to create camera component", __func__); exit_code = EX_SOFTWARE; } else if ((status = raspipreview_create(&state.preview_parameters)) != MMAL_SUCCESS) { vcos_log_error("%s: Failed to create preview component", __func__); destroy_camera_component(&state); exit_code = EX_SOFTWARE; } else { if (state.common_settings.verbose) fprintf(stderr, "Starting component connection stage\n"); camera_preview_port = state.camera_component->output[MMAL_CAMERA_PREVIEW_PORT]; camera_video_port = state.camera_component->output[MMAL_CAMERA_VIDEO_PORT]; camera_still_port = state.camera_component->output[MMAL_CAMERA_CAPTURE_PORT]; preview_input_port = state.preview_parameters.preview_component->input[0]; if (state.preview_parameters.wantPreview ) { if (state.common_settings.verbose) { fprintf(stderr, "Connecting camera preview port to preview input port\n"); fprintf(stderr, "Starting video preview\n"); } // Connect camera to preview status = connect_ports(camera_preview_port, preview_input_port, &state.preview_connection); if (status != MMAL_SUCCESS) state.preview_connection = NULL; } else { status = MMAL_SUCCESS; } if (status == MMAL_SUCCESS) { state.callback_data.file_handle = NULL; if (state.common_settings.filename) { if (state.common_settings.filename[0] == '-') { state.callback_data.file_handle = stdout; } else { state.callback_data.file_handle = open_filename(&state, state.common_settings.filename); } if (!state.callback_data.file_handle) { // Notify user, carry on but discarding output buffers vcos_log_error("%s: Error opening output file: %s\nNo output file will be generated\n", __func__, state.common_settings.filename); } } state.callback_data.pts_file_handle = NULL; if (state.pts_filename) { if (state.pts_filename[0] == '-') { state.callback_data.pts_file_handle = stdout; } else { state.callback_data.pts_file_handle = open_filename(&state, state.pts_filename); if (state.callback_data.pts_file_handle) /* save header for mkvmerge */ fprintf(state.callback_data.pts_file_handle, "# timecode format v2\n"); } if (!state.callback_data.pts_file_handle) { // Notify user, carry on but discarding encoded output buffers fprintf(stderr, "Error opening output file: %s\nNo output file will be generated\n",state.pts_filename); state.save_pts=0; } } // Set up our userdata - this is passed though to the callback where we need the information. state.callback_data.pstate = &state; state.callback_data.abort = 0; camera_video_port->userdata = (struct MMAL_PORT_USERDATA_T *)&state.callback_data; if (state.demoMode) { // Run for the user specific time.. int num_iterations = state.timeout / state.demoInterval; int i; if (state.common_settings.verbose) fprintf(stderr, "Running in demo mode\n"); for (i=0; state.timeout == 0 || iqueue); int q; for (q=0; qqueue); if (!buffer) vcos_log_error("Unable to get a required buffer %d from pool queue", q); if (mmal_port_send_buffer(camera_video_port, buffer)!= MMAL_SUCCESS) vcos_log_error("Unable to send a buffer to camera video port (%d)", q); } } while (running) { // Change state state.bCapturing = !state.bCapturing; if (mmal_port_parameter_set_boolean(camera_video_port, MMAL_PARAMETER_CAPTURE, state.bCapturing) != MMAL_SUCCESS) { // How to handle? } if (state.common_settings.verbose) { if (state.bCapturing) fprintf(stderr, "Starting video capture\n"); else fprintf(stderr, "Pausing video capture\n"); } running = wait_for_next_change(&state); } if (state.common_settings.verbose) fprintf(stderr, "Finished capture\n"); } else { if (state.timeout) vcos_sleep(state.timeout); else { // timeout = 0 so run forever while(1) vcos_sleep(ABORT_INTERVAL); } } } } else { mmal_status_to_int(status); vcos_log_error("%s: Failed to connect camera to preview", __func__); } error: mmal_status_to_int(status); if (state.common_settings.verbose) fprintf(stderr, "Closing down\n"); // Disable all our ports that are not handled by connections check_disable_port(camera_video_port); if (state.preview_parameters.wantPreview && state.preview_connection) mmal_connection_destroy(state.preview_connection); if (state.preview_parameters.preview_component) mmal_component_disable(state.preview_parameters.preview_component); if (state.camera_component) mmal_component_disable(state.camera_component); // Can now close our file. Note disabling ports may flush buffers which causes // problems if we have already closed the file! if (state.callback_data.file_handle && state.callback_data.file_handle != stdout) fclose(state.callback_data.file_handle); if (state.callback_data.pts_file_handle && state.callback_data.pts_file_handle != stdout) fclose(state.callback_data.pts_file_handle); raspipreview_destroy(&state.preview_parameters); destroy_camera_component(&state); if (state.common_settings.gps) raspi_gps_shutdown(state.common_settings.verbose); if (state.common_settings.verbose) fprintf(stderr, "Close down completed, all components disconnected, disabled and destroyed\n\n"); } if (status != MMAL_SUCCESS) raspicamcontrol_check_configuration(128); return exit_code; }