# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/i2c/sony,imx296.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Sony IMX296 1/2.8-Inch CMOS Image Sensor

maintainers:
  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>

description: |-
  The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
  sensor with square pixel array and 1.58 M effective pixels. This chip
  features a global shutter with variable charge-integration time. It is
  programmable through I2C and 4-wire interfaces. The sensor output is
  available via CSI-2 serial data output (1 Lane).

properties:
  compatible:
    const: sony,imx296

  reg:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-names:
    description: Input clock (37.125 MHz, 54 MHz or 74.25 MHz)
    items:
      - const: inck

  avdd-supply:
    description: Analog power supply (3.3V)

  dvdd-supply:
    description: Digital power supply (1.2V)

  ovdd-supply:
    description: Interface power supply (1.8V)

  reset-gpios:
    description: Sensor reset (XCLR) GPIO
    maxItems: 1

  port:
    $ref: /schemas/graph.yaml#/properties/port

required:
  - compatible
  - reg
  - clocks
  - clock-names
  - avdd-supply
  - dvdd-supply
  - ovdd-supply
  - port

additionalProperties: false

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>

    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        imx296: camera-sensor@1a {
            compatible = "sony,imx296";
            reg = <0x1a>;

            pinctrl-names = "default";
            pinctrl-0 = <&camera_rear_default>;

            clocks = <&gcc 90>;
            clock-names = "inck";

            avdd-supply = <&camera_vdda_3v3>;
            dvdd-supply = <&camera_vddd_1v2>;
            ovdd-supply = <&camera_vddo_1v8>;

            reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;

            port {
                imx296_ep: endpoint {
                    remote-endpoint = <&csiphy0_ep>;
                };
            };
        };
    };

...