Brooklyn/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>

/dts-v1/;

/ {
	interrupt-parent = <&gic>;

	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		serial0 = &uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "brcm,brahma-b53";
			reg = <0x0>;
			next-level-cache = <&l2>;
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "brcm,brahma-b53";
			reg = <0x1>;
			enable-method = "spin-table";
			cpu-release-addr = <0x0 0xfff8>;
			next-level-cache = <&l2>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "brcm,brahma-b53";
			reg = <0x2>;
			enable-method = "spin-table";
			cpu-release-addr = <0x0 0xfff8>;
			next-level-cache = <&l2>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "brcm,brahma-b53";
			reg = <0x3>;
			enable-method = "spin-table";
			cpu-release-addr = <0x0 0xfff8>;
			next-level-cache = <&l2>;
		};

		l2: l2-cache0 {
			compatible = "cache";
		};
	};

	axi@81000000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x00 0x00 0x81000000 0x4000>;

		gic: interrupt-controller@1000 {
			compatible = "arm,gic-400";
			#interrupt-cells = <3>;
			#address-cells = <0>;
			interrupt-controller;
			reg = <0x1000 0x1000>,
			      <0x2000 0x2000>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
	};

	pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	clocks {
		periph_clk: periph_clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <50000000>;
			clock-output-names = "periph";
		};
	};

	soc {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x00 0x00 0x80000000 0x281000>;

		usb@c300 {
			compatible = "generic-ehci";
			reg = <0xc300 0x100>;
			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		usb@c400 {
			compatible = "generic-ohci";
			reg = <0xc400 0x100>;
			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		usb@d000 {
			compatible = "generic-xhci";
			reg = <0xd000 0x8c8>;
			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};

		bus@80000 {
			compatible = "simple-bus";
			#size-cells = <1>;
			#address-cells = <1>;
			ranges = <0 0x80000 0x50000>;

			ethernet-switch@0 {
				compatible = "brcm,bcm4908-switch";
				reg = <0x0 0x40000>,
				      <0x40000 0x110>,
				      <0x40340 0x30>,
				      <0x40380 0x30>,
				      <0x40600 0x34>,
				      <0x40800 0x208>;
				reg-names = "core", "reg", "intrl2_0",
					    "intrl2_1", "fcb", "acb";
				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
				brcm,num-gphy = <5>;
				brcm,num-rgmii-ports = <2>;

				#address-cells = <1>;
				#size-cells = <0>;

				ports: ports {
					#address-cells = <1>;
					#size-cells = <0>;

					port@0 {
						reg = <0>;
						phy-mode = "internal";
						phy-handle = <&phy8>;
					};

					port@1 {
						reg = <1>;
						phy-mode = "internal";
						phy-handle = <&phy9>;
					};

					port@2 {
						reg = <2>;
						phy-mode = "internal";
						phy-handle = <&phy10>;
					};

					port@3 {
						reg = <3>;
						phy-mode = "internal";
						phy-handle = <&phy11>;
					};
				};
			};

			mdio: mdio@405c0 {
				compatible = "brcm,unimac-mdio";
				reg = <0x405c0 0x8>;
				reg-names = "mdio";
				#size-cells = <0>;
				#address-cells = <1>;

				phy8: ethernet-phy@8 {
					reg = <8>;
				};

				phy9: ethernet-phy@9 {
					reg = <9>;
				};

				phy10: ethernet-phy@a {
					reg = <10>;
				};

				phy11: ethernet-phy@b {
					reg = <11>;
				};

				phy12: ethernet-phy@c {
					reg = <12>;
				};
			};
		};

		procmon: syscon@280000 {
			compatible = "simple-bus";
			reg = <0x280000 0x1000>;
			ranges;

			#address-cells = <1>;
			#size-cells = <1>;

			power-controller@2800c0 {
				compatible = "brcm,bcm4908-pmb";
				reg = <0x2800c0 0x40>;
				#power-domain-cells = <1>;
			};
		};
	};

	bus@ff800000 {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0x00 0x00 0xff800000 0x3000>;

		timer: timer@400 {
			compatible = "brcm,bcm6328-timer", "syscon";
			reg = <0x400 0x3c>;
		};

		gpio0: gpio-controller@500 {
			compatible = "brcm,bcm6345-gpio";
			reg-names = "dirout", "dat";
			reg = <0x500 0x28>, <0x528 0x28>;

			#gpio-cells = <2>;
			gpio-controller;
		};

		uart0: serial@640 {
			compatible = "brcm,bcm6345-uart";
			reg = <0x640 0x18>;
			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&periph_clk>;
			clock-names = "periph";
			status = "okay";
		};

		nand@1800 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
			reg = <0x1800 0x600>, <0x2000 0x10>;
			reg-names = "nand", "nand-int-base";
			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "nand";
			status = "okay";

			nandcs: nandcs@0 {
				compatible = "brcm,nandcs";
				reg = <0>;
			};
		};

		misc@2600 {
			compatible = "brcm,misc", "simple-mfd";
			reg = <0x2600 0xe4>;

			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x00 0x2600 0xe4>;

			reset-controller@2644 {
				compatible = "brcm,bcm4908-misc-pcie-reset";
				reg = <0x44 0x04>;
				#reset-cells = <1>;
			};
		};

		reboot {
			compatible = "syscon-reboot";
			regmap = <&timer>;
			offset = <0x34>;
			mask = <1>;
		};
	};
};