mirror of
https://github.com/Qortal/Brooklyn.git
synced 2025-01-31 07:12:18 +00:00
84ba5b15ac
* Enhance GPIO addon for Noctua Fans for the Qortector upcoming case. This will put PWM signal to real-time. * Fixed RDP not letting a user login if not logged out on Cinnamon release (reported by Crowetic) * Update i2c sensor db * Fixed DRM broadcast over HDMI 2+ * Ease up DHCP security only to prevent Brooklyn blocking routers. * Add possibility to add extra memory for Cinnamon Desktop Release * Fix error message of Software Render mode on Cinnamon Desktop * Add proper offset for HD screens for pixel array *Fixed HDMI jitter for videocore4 GPU * Enable all radios (including Bluetooth)
51 lines
1.3 KiB
C
51 lines
1.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* linux/arch/alpha/kernel/es1888.c
|
|
*
|
|
* Init the built-in ES1888 sound chip (SB16 compatible)
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include "proto.h"
|
|
|
|
void __init
|
|
es1888_init(void)
|
|
{
|
|
/* Sequence of IO reads to init the audio controller */
|
|
inb(0x0229);
|
|
inb(0x0229);
|
|
inb(0x0229);
|
|
inb(0x022b);
|
|
inb(0x0229);
|
|
inb(0x022b);
|
|
inb(0x0229);
|
|
inb(0x0229);
|
|
inb(0x022b);
|
|
inb(0x0229);
|
|
inb(0x0220); /* This sets the base address to 0x220 */
|
|
|
|
/* Sequence to set DMA channels */
|
|
outb(0x01, 0x0226); /* reset */
|
|
inb(0x0226); /* pause */
|
|
outb(0x00, 0x0226); /* release reset */
|
|
while (!(inb(0x022e) & 0x80)) /* wait for bit 7 to assert*/
|
|
continue;
|
|
inb(0x022a); /* pause */
|
|
outb(0xc6, 0x022c); /* enable extended mode */
|
|
inb(0x022a); /* pause, also forces the write */
|
|
while (inb(0x022c) & 0x80) /* wait for bit 7 to deassert */
|
|
continue;
|
|
outb(0xb1, 0x022c); /* setup for write to Interrupt CR */
|
|
while (inb(0x022c) & 0x80) /* wait for bit 7 to deassert */
|
|
continue;
|
|
outb(0x14, 0x022c); /* set IRQ 5 */
|
|
while (inb(0x022c) & 0x80) /* wait for bit 7 to deassert */
|
|
continue;
|
|
outb(0xb2, 0x022c); /* setup for write to DMA CR */
|
|
while (inb(0x022c) & 0x80) /* wait for bit 7 to deassert */
|
|
continue;
|
|
outb(0x18, 0x022c); /* set DMA channel 1 */
|
|
inb(0x022c); /* force the write */
|
|
}
|