Create README

README

@@ -0,0 +1,61 @@
+#  Brooklyn R , The Moose V1.0
+* V1.0 is based off a Plasma Dektop 
+* V1.1a should be based on e17 sicne GPU issue is fixed
+* V1.2 will be based on communinty demand
+
+D: Raziel A. Crowe aka Scare Crowe
+M: Sean Torchy aka Moose on the loose
+A: Jason A. Crowe aka Crowetic
+X: Netflix & Chill
+
+		 GNUK Token Implementation
+		 Source: http://www.gniibe.org
+
+                     SWD port
+                        (GND, SWD-CLK, SWD-IO)
+    Power port +---------------------+
+           Vdd |[]           []()() -------+
+           GND |[]                  |      |
+               |()() I/O port       | USB  |
+               |      (PA2, PA3)    |      |
+               |                    -------+
+               +---------------------+
+
+http://git.gniibe.org/gitweb/?p=gnuk/fst-01.git
+
+If you rely heavily on VPN to bypass your regional filters then it will be a good idea to have extra entropy in hand. Any OpenSource Entropy stick should work on Brooklyn from now.
+
+Note: Use raspi-config to setup your wifi or add plamsa desktop network manager with "sudo apt install plasma-nm" . It is assumed that you  will be using an ethernet/network cable or keyboard and mouse to setup and configure your desktop. For headless image, you only need SSH access to your hardwired device.
+
+You can get a release and flash it directly on your USB 3 hard drive with Balena Etcher. The default image size is meant for a 32GB microSD card. If you have a bigger microSD card then after login do a "sudo raspi-config", head over to Advacned and resize the file system. Same can be done for a GPT partitioned USB 3 hard drive/SSD. Keep in mind that MBR drives have a size limit per block partition. For 4TB or bigger drive you might want to use GPT instead. If you have purchased a Raspberry Pi 4 elsewhere then you might have to flash the boot loader to do a mass storaeg boot. Ask The Moose on the loose for help.
+
+Want to send some tip for continued development or features / apps ported on Brooklyn?
+
+DOGE: DJTRkmhwhG7W8t7WvAddZBnNkKWML6nHqJ
+LTC: LQyhdH9LfL9m5vqMHfeTZdRoUU8qAouZmQ
+TRON: TPApU3DDHGGpCXx2xyzKwzbeze9FQ2My9K
+Monero: 8AAwtBUuf9qbFttEZevtkpScq1K5XG5iEjTWE5VjAea6gSFvDAiZzNAT6GWSt8bNLSHxvi57j3b2bYzC2KGgfeD664EzRHk
+ETH: 0xa69b98d7241006c2f23e895d81fdc7f562a8e378
+USDT ERC20 : 0xa69b98d7241006c2f23e895d81fdc7f562a8e378
+BTC: 13zp3jdZ5utX5vmZaZiDyJtam8daS4uBpC
+
+
+
+Linux Kernel Qortal 5.12.6-accelerated+stable
+=============================================
+
+There are several guides for kernel developers and users. These guides can
+be rendered in a number of formats, like HTML and PDF. Please read
+Documentation/admin-guide/README.rst first.
+
+In order to build the documentation, use ``make htmldocs`` or
+``make pdfdocs``.  The formatted documentation can also be read online at:
+
+    https://www.kernel.org/doc/html/latest/
+
+There are various text files in the Documentation/ subdirectory,
+several of them using the Restructured Text markup notation.
+
+Please read the Documentation/process/changes.rst file, as it contains the
+requirements for building and running the kernel, and information about
+the problems which may result by upgrading your kernel.