forked from Qortal/Brooklyn
7d3018da4c
* NVME, SATA NAND Security added * Qortal Core exception fetcher is now redone. * Update DT overlays for firmware * Fix for bvb clockj settings * Fix for no audio for sissy desktop porn watchers -_- ( thanks crowetic for watching gay porn and reporting me that bug asshat ) * Normalize the fetch() stream while doing a peer to peer handshake for nodes * Fix for RNG token editing error while performing a SHA256 encryption * Now under voltage errors will blink red led constantly for 5 minutes then go solid. * Improve kernel thread scaling for Qortal 2.0 core * HDMI circuit is now enabled at power up instead. * Added KMS * Added line replication instead of interpolation for VC4 GPU resulting in slightly better frame rates * Fix for long and doubles * Backplane clock is now set at standard rate * Capped HVEC clocks * Add support for Creative Cinema webcam for donkers who like sharing dick pics. *looks at crowetic* * More scanline XGA modes for people who have weird ass monitors of all sorts. * TX/RX flow control support is now 100% stable. No lags over 1Gbps ethernet. ( Hello Qortal 3.0 ) * Using flush cache instead of fetch for QC 2.0 resulting in performance gains * VC4 clock is now enforced for desktop oriented images. * Ondemand governor now waits for 2 seconds instead of 0.5ms to scale down to the lowest safest clock freq preventing lags to the core. * Timeout of OC set at 35ms from 90ms resulting in way better clocks and sync for Qortal 2.0 core
56 lines
1.5 KiB
C
56 lines
1.5 KiB
C
/*
|
|
* Platform data for OMAP1 USB
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive for
|
|
* more details.
|
|
*/
|
|
#ifndef __LINUX_USB_OMAP1_H
|
|
#define __LINUX_USB_OMAP1_H
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
struct omap_usb_config {
|
|
/* Configure drivers according to the connectors on your board:
|
|
* - "A" connector (rectagular)
|
|
* ... for host/OHCI use, set "register_host".
|
|
* - "B" connector (squarish) or "Mini-B"
|
|
* ... for device/gadget use, set "register_dev".
|
|
* - "Mini-AB" connector (very similar to Mini-B)
|
|
* ... for OTG use as device OR host, initialize "otg"
|
|
*/
|
|
unsigned register_host:1;
|
|
unsigned register_dev:1;
|
|
u8 otg; /* port number, 1-based: usb1 == 2 */
|
|
|
|
const char *extcon; /* extcon device for OTG */
|
|
|
|
u8 hmc_mode;
|
|
|
|
/* implicitly true if otg: host supports remote wakeup? */
|
|
u8 rwc;
|
|
|
|
/* signaling pins used to talk to transceiver on usbN:
|
|
* 0 == usbN unused
|
|
* 2 == usb0-only, using internal transceiver
|
|
* 3 == 3 wire bidirectional
|
|
* 4 == 4 wire bidirectional
|
|
* 6 == 6 wire unidirectional (or TLL)
|
|
*/
|
|
u8 pins[3];
|
|
|
|
struct platform_device *udc_device;
|
|
struct platform_device *ohci_device;
|
|
struct platform_device *otg_device;
|
|
|
|
u32 (*usb0_init)(unsigned nwires, unsigned is_device);
|
|
u32 (*usb1_init)(unsigned nwires);
|
|
u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
|
|
|
|
int (*ocpi_enable)(void);
|
|
|
|
void (*lb_reset)(void);
|
|
};
|
|
|
|
#endif /* __LINUX_USB_OMAP1_H */
|