Brooklyn/arch/arm/boot/dts/bcm2711-rpi.dtsi

// SPDX-License-Identifier: GPL-2.0
#include "bcm270x-rpi.dtsi"

/ {
	__overrides__ {
		arm_freq;
	};

	v3dbus: v3dbus {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <2>;
		ranges = <0x7c500000  0x0 0xfc500000  0x0 0x03300000>,
			 <0x40000000  0x0 0xff800000  0x0 0x00800000>;
		dma-ranges = <0x00000000  0x0 0x00000000  0x4 0x00000000>;

		v3d: v3d@7ec04000 {
			compatible = "brcm,2711-v3d";
			reg =
			    <0x7ec00000  0x0 0x4000>,
			    <0x7ec04000  0x0 0x4000>;
			reg-names = "hub", "core0";

			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
			resets = <&pm BCM2835_RESET_V3D>;
			clocks = <&firmware_clocks 5>;
			clocks-names = "v3d";
			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
			status = "disabled";
		};
	};

	scb: scb {
	     /* Add a label */
	};
};

&cma {
	/* Limit cma to the lower 768MB to allow room for HIGHMEM on 32-bit */
	alloc-ranges = <0x0 0x00000000 0x30000000>;
};

&scb {
	ranges = <0x0 0x7c000000  0x0 0xfc000000  0x0 0x03800000>,
		 <0x0 0x40000000  0x0 0xff800000  0x0 0x00800000>,
		 <0x6 0x00000000  0x6 0x00000000  0x0 0x40000000>,
		 <0x0 0x00000000  0x0 0x00000000  0x0 0xfc000000>;
	dma-ranges = <0x0 0x00000000  0x0 0x00000000  0x4 0x00000000>;

	dma40: dma@7e007b00 {
		compatible = "brcm,bcm2711-dma";
		reg = <0x0 0x7e007b00  0x0 0x400>;
		interrupts =
			<GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, /* dma4 11 */
			<GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, /* dma4 12 */
			<GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, /* dma4 13 */
			<GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; /* dma4 14 */
		interrupt-names = "dma11",
			"dma12",
			"dma13",
			"dma14";
		#dma-cells = <1>;
		brcm,dma-channel-mask = <0x7800>;
	};

	xhci: xhci@7e9c0000 {
		compatible = "generic-xhci";
		status = "disabled";
		reg = <0x0 0x7e9c0000  0x0 0x100000>;
		interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
		power-domains = <&power RPI_POWER_DOMAIN_USB>;
	};

	hevc-decoder@7eb00000 {
		compatible = "raspberrypi,rpivid-hevc-decoder";
		reg = <0x0 0x7eb00000  0x0 0x10000>;
		status = "okay";
	};

	rpivid-local-intc@7eb10000 {
		compatible = "raspberrypi,rpivid-local-intc";
		reg = <0x0 0x7eb10000  0x0 0x1000>;
		status = "okay";
		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
	};

	h264-decoder@7eb20000 {
		compatible = "raspberrypi,rpivid-h264-decoder";
		reg = <0x0 0x7eb20000  0x0 0x10000>;
		status = "okay";
	};

	vp9-decoder@7eb30000 {
		compatible = "raspberrypi,rpivid-vp9-decoder";
		reg = <0x0 0x7eb30000  0x0 0x10000>;
		status = "okay";
	};
};

&dma40 {
	/* The VPU firmware uses DMA channel 11 for VCHIQ */
	brcm,dma-channel-mask = <0x7000>;
};

&vchiq {
	compatible = "brcm,bcm2711-vchiq";
};

&firmwarekms {
	compatible = "raspberrypi,rpi-firmware-kms-2711";
	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};

&smi {
	interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
};

&mmc {
	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
};

&mmcnr {
	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
};

&csi0 {
	interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
};

&csi1 {
	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
};

&random {
	compatible = "brcm,bcm2711-rng200";
	status = "okay";
};

&usb {
	/* Enable the FIQ support */
	reg = <0x7e980000 0x10000>,
	      <0x7e00b200 0x200>;
	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
		     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
};

&gpio {
	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
};

&emmc2 {
	mmc-ddr-3_3v;
};

&vc4 {
	status = "disabled";
};

&pixelvalve0 {
	status = "disabled";
};

&pixelvalve1 {
	status = "disabled";
};

&pixelvalve2 {
	status = "disabled";
};

&pixelvalve3 {
	status = "disabled";
};

&pixelvalve4 {
	status = "disabled";
};

&hdmi0 {
	dmas = <&dma (10|(1<<27)|(1<<24)|(10<<16)|(15<<20))>;
	status = "disabled";
};

&ddc0 {
	status = "disabled";
};

&hdmi1 {
	dmas = <&dma (17|(1<<27)|(1<<24)|(10<<16)|(15<<20))>;
	status = "disabled";
};

&ddc1 {
	status = "disabled";
};

&dvp {
	status = "disabled";
};